How do you repair power door locks?

Answer by  Amber40 (24961)

First check the fuse, then check the switch, and finally check the solenoid. If any part does not work then replace it and it should fix the problem.

Answer by  Robin (149)

Remove panel behind interior handle and control switch panel. Disconnect control switch electrical connector. Remove door panel plastic lining. Remove connecting rods. Remove bolts. Replace assembly. Repeat steps in reverse.

Answer by  CELH (298)

First make sure your battery has power then make sure that you are getting electricity to each lock. If not you have to look for shorts in the wiring or rewire. If you are getting power but they don't work you have to take off the door panel and swap out the old power lock system with a new one.