How do you remove a front hub off a Ford Aspire?

Answer by  Shawn22 (138)

Matters what you are referring too. The hub cab all you need to do is open the spare tire compartment in the trunk and you should be able to find a tool to remove the hub from the front wheel. For more technical question you can ask your local dealership for simple answers over the phone.

Answer by  MarkGress (479)

You need to remove the wheel, the rotor and caliper, and then the hub. It will be located at the end of the axle.

Answer by  6ixk (1156)

A hub removal tool is best used here, an alternative would be to heat it but remember heat expands then contracts. Get a removal tool, they are around 15 dollars.

Answer by  Zaka (2315)

With great care. The front hub is a delicate surface area and will crack if mishandled. As a matter of fact, anything off a vehicle named "Aspire" is delicate.

Answer by  happytimes63 (865)

Block the wheels, remove the tire, and disc brake pads from the rotor using an allen wrench to loosen disc calipers. Remove the center cap and kotter pin, and wheel nut. The rotor will then come off. The wheel bearings may fall out when removing the wheel.

Answer by  N31J (148)

I assume that the hub caps on a Ford Aspire are simple. To remove it you easily screw off the hubs.

Answer by  laura27 (1216)

Be gentle with hub to make sure it want crack. Put car on jack stand and take wheel off. Take the two disc brakes off to retain both the screws & brake rotors. Make sure you have a tool called the allen wrench to unloose disc calipers. Take the center cap, kotter pin and wheel nut off.

Answer by  BigMACK (92)

first with the car on jack stands remove the rim and tire off the car. then remove the two disc brake retaining screws and then the brake rotor. remove the wheel hub from the steering knuckle and brake rotor shield by removing the wheel hub retaining nut. the bearing, bearing retainer and washer should be removed as well.

Answer by  Steven (309)

The Aspire is a very simple vehicle to work on since everything is so small and easily put together. The front hub is also an easy job. Remove the front tire and rim from the hub. You then just need to remove the calipers and rotor and replace, simple as can be.