car repairs


Question by  gaa785 (13)

How do I swap a dodge engine from a 2.7 to a 3.2?

I need to swap a dodge engine from a 2.7 to a 3.2.


Answer by  Steven (309)

Before swapping the engine, make sure that you double check your engine measurements to affirm that the engine fits in the bay. You then want to double check to make sure that the engine mounts will work for the engine swap. Swap the engines out and make sure all lines and electrical equipment is hooked up identically as before.


Answer by  moneyguy (81)

Most of the parts from the 2. 7 are interchangeable, go to a Dodge forum and research what you can use and what do you need to modify or order in advanced.


Answer by  champaign9497 (11977)

The only thing that should be different when you do it is you will need to bolt it to the other set of holes in the frame.


Answer by  mayi (212)

This can be a rather easy task unscrew the bottom engine boldts and take off the old engine and make a safe conection into the new engine connecting and installing all the cables to make the engine secure the 3.2 engine is way bigger so you have to be careful.


Answer by  Kozmo (286)

Air cleaner, i used the one from my 2. 7 power steering pump. make sure you get res. that goes on finder well Oil cooler lines. get a 3. 2 radiator or get an aftermarket oil cooler or plug the lines A/C. make sure you get the bracket the A/C mounts on upper part or the passenger side.

You have 50 words left!