How do I replace the battery on my keyless remote?

Answer by  Allstar (2071)

On the back, there should be a tiny little screw holding on a door. Remove that, and then note which way the battery was in there. Go buy one just like the old one, put it in the same way, and re-assemble. If all else fails, your dealership will probably do it for the cost of the battery.

Answer by  Sabharish (1610)

Remove the back cover of your key less remote and remove the exhausted batteries from it and replace the new batteries. Be careful that the polarities are placed correctly. Then place the outer cover.

Answer by  Wrenchman (638)

On the underside, there should be a door. It's probably held on by a tiny screw. Remove the screw and remove the door. Underneath that should be the battery. Note how the old one is installed, and install the new battery the same way. Put the door back on. If all else fails, have your dealership look at it.

Answer by  nicksdakota (74)

Replacing the battery in your remote should be very simple. You will have to pry the remote apart using a screwdriver or other prying tool. Your battery should be plainly visible. Use the screwdriver to pop it out. Put another battery of the same type in its place and pop the remote back together.

Answer by  champaign9497 (11977)

Just take the back off from it tak the old battery out and put the new one in the thing you have to be careful about is after you install the new battery push on it so it is all the way in.

Answer by  Amber40 (24961)

Well it will vary by manufacturer. Typically all you have to do is us something to pop the hey fob apart. Then the battery can be accessed and replaced with the new one.

Answer by  Amber40 (24961)

It should either have a screw holding it together or the case may come apart to access the battery. Consult your owners manual or check online for specific direction.

Answer by  heather88 (1897)

There should be a screw in the back of the keyless remote. take it off and then you will know what type of battery it takes. If there isn't one you would probably have to look online to find out.

Answer by  laura27 (1216)

Unscrew the remote apart and get a screwdriver to get it open. Buy new battery and take old battery out and make sure you carefully push the new battery all the way in so it will work correctly. If problem still resist , contact the manual owner where it was manufactured to get instructions.