Remove air bag fuse, remove air bag screws from behind, loosen wheel nut, pull steering wheel and remove, compress locking mechanism and remove clip, remove lever screw, unplug and remove.
Separate the column by removing the four bolts on the bottom which will require a long screwdriver. remove the three bolts securing the combination switch (turn signal). Remove the 2 wiring harnesses. Install just the opposite.
Most turn signal levers are just screwed in like a bolt. See if yours is like that. If not you will take the bottom of the steering column off and there will be 2 bolts holding the lever in. Very simple job for anyone.
