lawn mowers


Question by  cooldude (62)

How do I repair a Tecumseh valve setting for my lawn mower?


Answer by  japratt (1687)

If you are wanting to repair this type of valve then you will need to work on the engine. The valve is located right next to the fuel pump area.

Reply by eldred (7):
these engines don't have fuel pumps... gravity feed  add a comment

Answer by  eldred (7)

remove valve cover, rotate engine to exhaust full open.. check clearance at push rod rocker arm. Should be about. 006... back off center set screw, tighten retaining nut under screw... use feeler gauge to get correct clearance. Tighten retaining screw and repeat for intake valve.

You have 50 words left!