How do I relocate the spark amplifier module in my Land Rover?

Answer by  6ixk (1156)

A simple positive and negative wire off the two terminals will be sufficient. Ive done it many times myself, just make sure you solder it as to avoid it bumping off.

Answer by  Xceptional (642)

This is a fairly broad question becomes there are many different models of your type of car. I would either consult a mechanic personally, or refer to your user manual.

Answer by  Amber40 (24961)

You best bet will be to buy a kit specifically made for doing that. Check online for place to buy. However if you are brave you can relocate it yourself by extending the factory wires and mounting the module somewhere away from heat. Just make sure you know what you are doing and use the appropriate gauge wire.

Answer by  karthikeyan72 (116)

i recommend that you install 2 ft jumper cable and relocate it to a spot that rising heat wont make unstable i have some here, or you could bit the bullet and fit a HEI dissy as i use and lose the coil and externally mounted guts like the module and have a one wire hookup and seriously fat sparks

Answer by  laura27 (1216)

Buy kit extend factory wires to mount module away from heat. For sure you'll have to use the correct gauge wire to complete job.

Answer by  laura27 (1216)

I prefer you to buy a kit. This help extend factory wires to mount module away from heat. Need correct gauge wire to complete job. If can't find in auto part stores checkout online stores that has the exact kit you need. If need of help consult your mechanic.