Question by  crispyk3 (5)

How do I go about connecting a VCR and a digital box?


Answer by  aeturnus (474)

Start by looking at the rear of both your VCR and the digital box, and then locate the red, white and yellow jacks. Using audio and video cables, connect them to the out jacks on the digital box to the in jacks on the VCR. That's the start.


Answer by  Turkwork (1150)

You run the cable into the digital box. The digital box should have an out. You run out to the VCR. Then run out of the VCR to the TV.


Answer by  Brandon55 (1719)

The VCR, TV, and Digital box have multiple inputs and outputs. Most instructions will say to connect each one to the TV on a different input. If that is not possible then connect the VCR to the digital box and the digital box to the TV. If digital box goes through the VCR, the VCR will always be on.


Answer by  Amber40 (24961)

Start buy connecting the cable to the the box. Then run a cable from the digital box into the vcr, then run a cable from the vcr to the tv.

You have 50 words left!