How do I check the fuel pump on a Ford Taurus?

Answer by  ct (27)

The fuel pump lies within the fuel tank. therefore in order to check the fuel pump you need to drain the fuel tank and lower the tank. disconnect any and all wires and hoses. once the tank is off the vehicle youll see the pump which needs to be turned counter clockwise

Answer by  Amber40 (24961)

Well you can switch the key on to see whether or not it runs. Check the pressure by splicing a gauge into the fuel line. A volume test can e done be recording the amount of fuel pump out of the line over a period of time.

Answer by  VSauce (85)

If your car has a fuel rail, you'll need a fuel pressure gauge. It will look like the valve stem to a tire, except it will be under the hood, near the injectors. Test it. If the pressure is less that 35 psi, your pump is bad.

Answer by  jimbob11 (195)

Turn the key to the on position, but do not start the car. you should hear a buzzing or whirring sound from the back of the car. This is the fuel pump priming. If you hear no sound, check the connection to the fuel pump for voltage. If you have a schrader valve, check fuel pressure during cranking.

Answer by  gbonez (86)

make the fuel is drained, get the manual and find the steps to remove it. make sure you have the right tool before starting. then you could take it to an auto shop to get iti tested.

Answer by  stella97 (17)

I have know idea. I would check the owners manual and see if there is a diagram for you to see.