Help me troubleshoot my Chrysler LHS that has no spark?

Answer by  Atomicrayon (2504)

This is a tricky question. Start by checking the obvious and perhaps even consult your dealership or local automotive shop/expert. It's possible you may just need to replace the spark plug as there may be no way to save it. Have you recently gotten the interior of your car wet? If so replace the spark plug.

Answer by  jkjk19 (134)

What year is the car? Is it a coil on plug, coil, or a distributor? Check the plugs by pulling the plug and keep it plugged into the wire or coil and place it near solid metal such as the head and crank it and see if you have spark there if not maybe change the distributor or coil.

Answer by  Advisor (1032)

This particular model is very sensitive to humidity and when garage kept tend to retain moisture. Drying the engine may solve the problem temporarily. Also, platinum plugs are required.

Answer by  Allstar (2071)

First, check the battery/alternator. Next, I would replace the spark plugs with new ones. Then check all the connections to the ignition module, make sure all the wires are hooked up where they should be. If none of the above works, consult your local Chrysler dealer.

Answer by  kennethjgoodson (4903)

The best thing to do is to make sure you have good spark plugs in the motor. If the plugs are good you are going to want to check all the wires and cables.

Answer by  Matt67 (112)

Assuming the coils have been checked I would suspect that the cam position sensor has gone bad and needs replaced.

Answer by  pomysean (0)

Premium performance offered by Bosch platinum plus and also has excellent value while the Bosch platinum-Ir fusion delivers ultimate in spark plug performance and long service life.