Question by  steve41 (37)

Can you help me with car alarm troubleshooting?

I need help with my car alarm.


Answer by  deepa (82)

Put a key in the ignition, and turn forward all the way just before cranking. Then within 5 second press and hold in the valet button until the light blinks in that area


Answer by  Stenu (43)

Usually problems with car alarm systems are because something is wrong with grounding. Double check that every ground wires are properly connected and that any signal line is not accidentally grounded. If your alarm system detects the position of the car, please ensure that the device is properly mounted and balanced.


Answer by  MechMan3 (885)

More than likely it's a power issue. If it's remote control the battery in the remote may need to be replaced. Don't start tearing the thing apart until you go over the basics.


Answer by  SofiaY (82)

If you have a hornet alarm system, and I don't know how to stop the alarm? Cut the speaker wire with a knife that would stop sounding.

You have 50 words left!