What is the best way to shine up your Revere pans?

Answer by  katkat (19)

To shine up your Revere Ware pans, cut a lemon in half and cover the cut half with a couple of teaspoons of salt. Rub the cut side over the copper bottom of the pan. With a small amount of effort the copper will look new. The rest of the pan can be shined with a scrubbing pad like SOS.

Answer by  benay89 (26)

You can most likely google a local stainless steel company and see if you can buy a kit to help you out.I have also heard using car 3m liquid compounds the 1000-1200 grit should work.Rubbing in the same direction of the grain should help a lot and use something like vinegar to get the grease off or a household degreaser.

Answer by  Christian9247 (5042)

Well if you have burnt the inside of the pan you have more than likely stuck some crud to the surface. Simmer water and vinegar along with baking soda in the pad for about 20-30 minutes. If this doesn't work, use a heavy duty cleaner. This will weaken the carbon burnt crud inside.

Answer by  wkylady (29)

My husband uses lemon juice when he cleans ours. Are you wanting to clean the outside or the inside? My hubby uses it to clean the inside stains.

Answer by  mammakat (11147)

If stuff is burnt inside, simmer water, vinegar and baking soda on very low for about 15-20 minutes. A good recommendation I got recently was to use Mr. Clean Magic Eraser, which shines it up nicely. For the copper bottom, my mom coated it with ketchup, let it sit and cleaned it off- I swear by that.