To access the TCP/IP settings in Windows 2000 pro, open the control panel, double click on network connections, right click the connection you wish to modify, and change your settings.
Click start and then settings and click control panel. There choose network settings and you will find a LAN symbol [two computers] right click that icon and click properties. In that window double click last option tcp/ip and you are done. Now change your manual settings.
Click TCP/IP then click Uninstall from dial-up connections and from all LAN connections in the Network and Dial-up Connections tool. Install another protocol to create a placeholder for your connections. Restart your computer. Click LAN connections, reinstall TCP/IP, and then restart your computer.
To get to the settings for TCP/IP Click Start, point to Settings, click Control Panel, and then double-click Network and Dial-up Connections. Right click the interface you want, then click Properties. In the box you will see a entry for Internet Protocol(TCP/IP), click it, and then click properties. From there you can edit the TCP/IP settings.
select start, click control panel, click network connections, right click your network adaptor, select properties, in the scroll menu select "internet protocal(tcp/ip)" and click the properties button.
You're going to need to adjust your router, get the installation CD and follow the steps that you are prompted to follow. For electronic questions like this i would refer to either the user manual or consult a trained and licensed electronics expert, as there are many types, and this is broad.
First you must know what you want to setup the IP address as. Go to the control panel. Once your in the control panel double click on network connection. There should be "this connection uses the following protocols... ". Scroll down to TCP/IP. Double click that entry. Once in here, type your desired IP address, gateway, & subnet mask.
In the Network and Dial-up Connections menu right-click the interface and select Properties. Click Internet Protocol then Properties. Select Advanced, options, TCP/IP filtering, then click Properties, and enable Filtering.
To access the tcp/ip open control panel and double click on network connections, right click the connection you want to modify and change your settings.
click the start meun, then settings, then control panel. There will be an icon for network in the control panel that needs double clicked on. Select the network card you wish to configure, right click and select properties. Select the TCP/IP internet protocol and click the properties button.
First you must hit your start tab than go to the control panel. Find and click on network connections, change the connection or add a new one from there. Install it than restart your computer.
