How do you replace the power door actuator in a Honda Accord?

Answer by  Amber40 (24961)

Well start by removing the door panel. The located the actuator usually it is next to the latch assembly. You may have to have the window glass up to access it. The remove the rivets or bolts along with any electrical connection and hardware. Then install the new one.

Answer by  loveulouis (176)

remove screws on inside door handle,remove screws at bottom corners on inside handle. pop out door panel. find lock should be upper left side of door. it will be riveted in place. drill out the rivets take plastic actuator rod off and replace with new rivets

Answer by  worker8388 (994)

Remove the actuator by removing the three screws. Window and rear window track has to be removed for easy access. Then remove the plastic cover from the top of the actuator by removing one screw. Now replace the actuator and plug it in. Turn the ignition and test it. Make sure to screw all screws.

Answer by  heather88 (1897)

Go the the auto parts store and get a manual for the car, tell them the make and model of it.