How do you change the oil in a Volvo?

Answer by  Amber40 (24961)

Warm the engine up and remove the oil drain plug. Remove the oil filler cap and allow all the oil to drain. Then remove your filter. Then install the drain and new filter being sure to fill it a little with oil and lube the gasket. Then fill the engine with oil and look for leaks.

Answer by  loveulouis (176)

First jack up front of car, put jack stands under frame. look at oil pan you should find a 15MM or a 13MM bolt have a pan ready drain all fluid and replace filter,when replacing filter put and ring of oil on filter rubber washer install, reasemble

Answer by  heather88 (1897)

Get a manual for the car at and auto parts store, tell them the make and model of the car.

Answer by  saileshks (37)

Remove the entire bottom splash. Then, remove the oil drain plug to drain the oil. Once the oil is drained, tighten the plug. Remove the plastic catridge top and the filter. Clean the cap, replace the white rubber gasket, and slip on the new filter, if you're replacing that too. Tighten the cap and fill the oil.