computer






 

Question by  surya (21)

How do I switch screen on a Gateway?

 
+7

Answer by  ebo (49)

Plug in new screen or monitor with laptop or computer. Then right click on the desktop and go to desktop properties and find the graphic properties. If it is a desktop, you can switch monitors out with any monitor. You are limited by the resolution your video card. If laptop, remove the bezel and display and unplug the display cable.

 
+7

Answer by  murali680 (559)

Switching between two screens is very easy to do. First of all, we want to plug in new screen or monitor with laptop or computer. Then right click on the desktop and go to the desktop properties and search in around the dialog box and find the graphic properties. From the above method we can switch to the new screen.

 
+6

Answer by  BigD103 (548)

If it is a desktop machine you can switch monitors out with any monitor you choose to buy. You are only limited by the resolution your video card can display. If it's a laptop you will have to remove the bezel and dsiplay and unplug the display cable.

 
+6

Answer by  RandomDan (489)

If it is a laptop, then there is usually a hotkey (used in conjunction with the 'fn' key) that will work. Something like 'fn' + f7.

 
+6

Answer by  severaltimes (247)

You can switch screens on a Gateway or most other computers. First, plug in the other monitor or screen you want to use. It needs to be connected to power and to the computer. Right click on the desktop, select Properties, then Settings, and select your new monitor.

 
+6

Answer by  andybdrums (185)

Switching screens is very easy, but the exact directions differ on each computer. Here are some general instructions: minimize or close any windows so you are viewing your desktop. Right click on the desktop and go to desktop properties. Search around the dialog box the pops up and find the graphic properties.

 
+5

Answer by  gigo (1706)

You need to go directly with an IP cable on the gateway like you would do with a router. You need to know the IP adress of the gateway .

 
+4

Answer by  surferx (33)

You turn the power button on. The power button is typically found on the lower left portion of your screen. The screen is that rectangular thing you view images on. If the power is on and you still do not have an image, make sure your screen is plugged into your computer.

 
+3

Answer by  archie (73)

Just right click on the desktop and go to the desktop properties and find the graphic properties. From the above method and we can switch to the new screen.

 
You have 50 words left!