car repairs


Question by  Amom (701)

How do I fix an ignition fuse on a car?

I have a Honda Accord.


Answer by  swampy02 (145)

Grab your owners manual and find where the fuse box is on the vehicle, then find which fuse is the ignition fuse (it will be all laid out in the owner's manual). Find the fuse in the fuse box and simply pull it out and replace it with the correct amperage fuse.


Answer by  thattractorguy (2970)

Locate the fuse box. Inside the fuse box, there will be a fuse marked ignition. Replace this fuse with one of the same rating.


Answer by  Amber40 (24961)

Well if you have a blown fuse then you simple locate and remove the old fuse. Then you install a new fuse with the same amp rating. The fuse panel should either be located on drivers side kick panel or possibly under the hood. Either look in your owner's manual or online as to witch fuse is for the ignition.


Answer by  Grag (452)

You can not fix the fuse but you can replace it.The fuse should be in a fuse box under the hood of your car.use your manual toget the right one


Answer by  SAviorSorrOW (77)

There is a small cover underneath the steering wheel. You take that off and look at the cover. there should be a piece of paper that says where the fuse is at. you need to remove the fuse with the included tool, then make sure you replace it with the appropriate wattage fuse.


Answer by  Steven (309)

The fuses for the ignition are going to be under the hood of your Honda Accord, simply pull the fuse and replace it.


Answer by  japratt (1687)

To fix the ignition fuse problem that you may have on your car you will need to remove the low dash.

You have 50 words left!