How do I change a wiper blade on the rear window of my Mitsubishi Outlander?

Answer by  Anonymous

I just change mine (Outlander 2009). Less than 5 minutes. Pull on the end of the blade so it can slide out. Remove the steel reinforcement on each side of the blade and install them on the new one. Slide back the new blade. Cost 9,50$ for the blade.

Answer by  McCheese (1248)

Mitsubishi wiper blades are a real hassle to change, because you need tools. While most cars are snap on snap off, Mitsubishi wants you to go to the dealer.

Answer by  Christian9247 (5042)

ON the actual wiper is a small clip where the window blade attaches to the wiper. Unclip the worn rubber blade and replace it with a new one.

Answer by  JohnAndrew (199)

I dont think that the rear wiper blades of a Mitsubishi Outlander is replaceable. However, if you can you should just pull the blade up and look for a clip that holds it. Pull on the clip and simple remove the old wiper blade.

Answer by  astrojazz (367)

There should be a small clip that attaches the rubber wiper blade to the metal car wiper. By releasing the clip you can easily replace your blade.

Answer by  Assy (29)

Change the rear wiper, THAT remove the old wiper from the wiper arm. Wiper is usually attached to the arm with a clip-like IN arrangement and then install new one.

Answer by  loveulouis (176)

pull the blade up, you will see a clip that locks it in place pull on the tab and pull wiper off then replace new one.

Answer by  heather88 (1897)

It should be easy to get it off. They slide off. Or you could go get a manual for the car. They slide off from what I know about them.

Answer by  nasimafiroz (3)

The wiper of a Mitsubishi Outlander is not replaceable. You have to purchase a wiper blade replacement from an authorized Mitsubishi dealer.

Answer by  kelly79 (5)

well i would take the whole wiper of and replace the blade like that as it would be easier and more convenient.but then again do these sorts of cars have rear wipers.