Is changing a Nissan Sentra mass air flow sensor difficult?

Answer by  Untitledwater (27)

No it is not very difficult, you just have to disassemble the intake system. Then look for the sensor unhook it and free it from its connector. Then take the new sensor and bolt it in the same place from which you took the old out and connect the wires. Then put back the intake system.

Answer by  worker305277 (84)

no it is a very simple exchange that takes anywhere from 30min to an hour to replace. and only has one plug running into it

Answer by  Amber40 (24961)

Typically the process for doing this is not difficult. It requires some dis-assembly of the intake system. The sensor is unbolted from the intake tube and the connector unhooked. Then just reverse the process with the new piece.

Answer by  drew89 (117)

No, it is not difficult. the MAF sensor should be clearly visible on the intake. unplug the harness and unscrew the sensor, and replace with the new sensor.

Answer by  japratt (1687)

If you are changing the air flow sensor it should be pretty easy and only take you about ten minutes.

Answer by  TRD (38)

No. It is not that difficult. You can easily spot the MAF sensor on the intake pipe or at your intake manifold.