How do I apply or install resin moulding to my ceiling?

Answer by  qamar (73)

After plastering the ceiling with cement sand mortar and curing for minimum seven days so that plaster is set then apply thick coat of Plaster of paris with a care of proper level and finish make desired designs with proper hand tools used by painters specially by small steel plates or small wooden planks.

Answer by  nate1 (146)

It is reccomended to not install resin directly to drywall substrates. Installation to a 3/8 plywood surface by nailing with a cone headed nail is the preferred meathod. A multi-purpose tile adhesive can be used as an installation aid, but not as a primary adhesion material. Using the adhesive will make installation esier and faster.

Answer by  twconroy (148)

Resin moulding is most commonly applied using a special adhesive designed for the task. Simply begin on one side of the ceiling and go in one direction setting moulding.

Answer by  krishna54 (212)

faux wood molding made from plastic form of resin is applied or installed over appropriate type of glue such as dap panneling, sometimes slow drying adhesives are also used if reposition of mould is selected

Answer by  SubhashChander (1773)

Resin moulding to the ceiling can be installed with the help of asbestos sheets fixed with the help of screws of desired length.