How do you set a tricam?

Answer by  kneedragon (15)

A tricam is inserted in a crack or gap and angled so as to jam in place, thus providing a firm anchor for webbing or rope.

Answer by  eatwrite (1559)

If you are planning to do some climbing, you may want to have a device that is stablize. You can set up a tricam as some type of protection when climbing. Unfold it at the hinges and slide the "X" into it slot. The four step stool one is used for maximun height and can hold up to 200 pounds.

Answer by  Kath (1537)

You want to set the tricam placement with a slight pull, not to tight or it will tend to stick. Then you can place the sling on it.

Answer by  chlentz (98)

With setting up a tricam make sure that you have an area in the rock that will secure your tricam, which will enable you to secure your rope or screw.