Where is the Jeep Cherokee's "serpentine tension bolt"?

Answer by  dee73 (1062)

Open the hood up.You will need to take the fan shroud out.The serpentine belt is located towards the front of the engine.Between the alternator and main pulley.Next to the belt is a little bolt. That is were the bolt will be.It is actually, it is a automatic tension pulley.The size of the bolt will be either 9/16or a 5/8.

Answer by  tony91 (73)

It is located in the engine compartment, towards the front of the engine, between the alternator and main pulley. It will be either a 9/16" or 5/8" bolt

Answer by  elained (44)

Pop the hood, take the fan shroud out, take the serpentine belt off.On the front of the engine drivers side, above the alternator.

Answer by  MechMan3 (885)

The tensioner pulley is located on an arm in the center of the belt. It will not have a bolt but a square hole to put a ratchet into

Answer by  cgrid76hotmailcom (545)

That part is on the block of that auto . next to the serpentine belt setup should be a little bolt

Answer by  oui72 (514)

It is not actually a bolt. It is rather an automatic tension pulley. It is located underside of the engine. It looks like a simple two inch cylindrical tin can.