Where is the crankshaft sensor located on a Concorde?

Answer by  MarkGress (479)

The crankshaft position sensor is located on or in the distributor. If your sensor is bad it is best to replace the entire distributor.

Answer by  Advizor (230)

It is located inbetween the engine and the transmission really close to the seam where the two meet. it will be on the transmission side of the seam. It has three wires coming off of it with a paper style gasket seperating it from the transmission.

Answer by  Jimbob (2275)

The sensor is located internally inside the block but you can remove it from the outside as the sensor wires are connected outside the block.

Answer by  maddof (64)

the concorde by christler is easy to find but you need to find out where the unscrew part of it is and it is determined by the horse power affecting.

Answer by  Amber40 (24961)

Not knowing more I can only suggest where it could be. Look to the center rear engine low on the driver side of the block. It's mounted on cylinder block