how to
 

 how to







 

Question by  coolcatzz (19)

What is the best way to remove rust from a bike frame?

 
+13

Answer by  ratnam (150)

Rust is due to the moisture on the frame. If we keep the bike always dry we can get rid of the rust. To remove the rust ,rub the area with a mixture of kerosene and coconut oil and leave it a day or two.Clean the frame with this mixture daily. It will prevent rust.

 
+6

Answer by  MyraB (25)

To remove rust from a bike frame, first clean the frame. Then, use a steel wool pad and gently scrub each rust spot, then rinse and dry it. If rust remains, repeat the process. Afterward, coat with a rustproofing paint or clear coat to protect the frame.

 
+6

Answer by  Purple (948)

I like to use an S.O.S pad. Have warm water in a bowl and a paper towel and dip the pad in the water. Lightly apply the pad to the bike. Press as hard as it takes to remove the rust. Try not to makes grooves in the paint by pressing to hard. It usually comes off faily easy.

 
+5

Answer by  Sally11 (78)

If the rust has already eaten through the metal, it is too late. If it is only on the surface, a combination of steel wool followed by metal polish should do the trick.

 
+5

Answer by  Allstar (2071)

For some minor rust around the welded joints, don't bother. Just leave it there. If it's pretty major, the best way I know is to sand it to bare metal and then repaint the bike. It's a lot of work, you might find a power sander or a sand blaster to be easier to use.

 
+4

Answer by  Anonymous

To remove rust from a bike frame is to use brake fluid and a sponge and scrub the rust off it will take awhile

 
+4

Answer by  Amber40 (24961)

Well typically you would sand it by hand or if it is deep use a wire brush on a drill. Otherwise you could use some rust converter on it.

 
+4

Answer by  ruffy (1117)

wash the bike good and then dry good and let to make sure it s dry then take scraper and scrape all the big flake off,then get sand paper and sand awayall the rust

 
+3

Answer by  Anonymous

If You Want To Remove Rust From Steel ... You Can Use Soda Juice For Example ?? 1- Pepsi But You Should Put Soda (PEPSI) Only Only In The Rust Place .... Thanksss

 
+3

Answer by  bb (674)

sometimes you can use sandpaper to do it. also, you could have someone sandblast or beadblast it. this method usually is more effective because it removes all of the rust from the metal.

 
+3

Answer by  diva25 (4016)

The best thing to do is to take your bike to a repair shop and have them take care of it. They know what they are doing.

 
You have 50 words left!