How to you install laminate floor t-molding?

Answer by  Birdmen09 (27)

Laminate floor t-molding should only be installed where upon two sections of flooring meet that need to be seperate, ie carpet to laminate floor. Placing firmly over the speration, the t-molding must cover both seperate sections, using the appropriate nail for the job, nail down firmly making sure unmoveable.

Answer by  StarOne (941)

T-molding is used to transition from one type of flooring to another. It is placed between the 2 floors. Both floors must be of equal height for the molding to sit correctly. It is attached to the subflooring not the actual floor.

Answer by  worker4321 (104)

First of all,if it's a large surface you will need some help. The,there's a material that you need to apply on the floor,and then put the laminate floor,over that material,fix it at the corners with screws and that's all

Answer by  TMyers (1084)

To install t-molding, you will need to lay it over the exposed edge of the raised section of flooring and secure it to the lowered section.

Answer by  Jimbob (2275)

You just have to measure everything and then cut it to size. When you lay it down it just clips together with a little hammer.

Answer by  srainne (2597)

The instructions for this are a little too long, but you'll be able to find videos and step by step instructions by putting your question in a search engine.