cars
 

 cars  how to







 

Question by  ThornGenX (23)

How to fix the hinge door on a Volvo 80 S80?

I need help with my Volvo.

 
+6

Answer by  soccer593 (476)

Well you may need to replace it. First remove the pins in the hinge and then remove it. Tap on it with a hammer until it slides out. The remove the bolts from the frame's hinge. The replace it with a new hinge, line up the bolts, and tighten it.

 
+5

Answer by  TravisUSMC (979)

if it's the hinge itself that is bent you need to support the door and then remove the bent hinge. Either replace it with an unbent or fix it.

 
+4

Answer by  Atomicrayon (2504)

You're going to need to locate the screws holding the door in place because the door we'll need to be removed for this job. The screws are protected by rubber guards that can be removed by hand or with a toothpick. You'll most likely need a Phillips screwdriver.

 
+2

Answer by  laura27 (1216)

Remove screws thats holding the door in place. Take pins out of hinge and then remove hinge. Tap on it with hammer until slides out. Next remove bolts from frame's hinge. Put new hinge in and line up bolts. Make sure you tighten bolts real good. You'll need a screwdriver. If need help take to a mechanic that charges cheap.

 
You have 50 words left!