How do you reset a Canon printer?

Answer by  James3474 (30)

Unplug the power and remove all cables (USB as well). Press and hold the Start button while you replug the power. Hold the Start button and press Resume (two times).

Answer by  BrokenWits (382)

First turn the printer off. Next Hold the resume button for a few seconds, turn it back on, and press the resume button twice.

Answer by  DM (228)

The easiest way to reset the printer is to unplug it from the wall, wait 30 seconds, then plug it back in. For a hard reset to factory defaults, you can use the included software or consult the manual.

Answer by  oggy (33)

Steps for resetting the printer: Turn the printer off with the power button Remove data cable from printer Unplug the power-cord and plug it back Turn the printer back on.

Answer by  ShayanFCB (366)

Turn off the printer Hold the resume button and push the power button Keep holding the power button and release resume button Keep holding the power button and press resume button twice Let go of both buttons Click resume four times and click power. Turn it off and then on again

Answer by  Phil28 (379)

This depends heavily on the specific model. Usually its a combination of holding down certain buttons during powerup. Do a google search for your model and keywords like 'resetting'. Or try Canon support to help you with that. A general answer applying to all models is not possible in this case.

Answer by  minikloon (20)

Turn the printer off. Press and hold the button with a triangle and press the power button. Double-press the Resume button while holding the Power button. Release the power button and click 'Resume' four times then click 'Power'. Reboot the printer.

Answer by  Manoj79 (46)

Start with printer off Press and hold resume Button (triangle in the circle) and click 'Power' button. hold the Power button, release Resume Button. Without releasing the Power Button, double click 'Resume' button and then release Both Buttons.