How do you replace the oil pump on a Ford Econoline f150?

Answer by  69nova (389)

To replace the oil pump you will be required to remove the oil pan to access it.It is helpful to undo the engine mount bolts and lift the engine.

Answer by  lumberman1979 (40)

If it is an inline six, disconnect motor mounts and lift the engine. Remove oil pan mounting bolts and drop pan, reach in and unbolt the pump. Reverse to install.

Answer by  bigcheesyness (56)

The oil pump is located on the driver's side, below the engine. You have to raise the engine and drop the pan to properly change the oil pump.

Answer by  bill56 (15)

you have too raise the motor remove the motor mount bolts raise motor as high as you can drain oil and lower the oil pan remove the oil pickup tube slide pan out of way. the oil pump is on the driver side and is held in with 2 bolts.

Answer by  Amber40 (24961)

Well typically all you have to do to get to the pump is drop the oil pan being careful not to damage the gasket. The you just unbolt the old pump and bolt up the new one. Then just put the pan back on.