How do I remove a driver door panel?

Answer by  thelostone (1457)

There should be several screws on the door on the handle you use to close it. Remove those then the door panel has snaps that you just pull out.

Answer by  Atomicrayon (2504)

There are some screws hidden behind rubber guards located in the inside of the door panel, you're going to need some allen wrenches.

Answer by  Shawn22 (138)

To remove the drivers door panel you must 1. Remove the screws which are located towards either that latches or the hinges of the door panel 2. Now that the screws needed are removed, you need to pry off the panel at the bottom with a philips screw driver.

Answer by  laura27 (1216)

Remove screws toward latches or hinge of door panel. Pry off bottom panel with a phillip screw driver or allen wrench. Then pull it out and put new one in.

Answer by  eyeguy (3760)

At the portion of the door were you find the armrest or the lever to open the door, you should find at least two screws. Start here and once these screws are removed slide a stiff metal spatula between the panel and you will feel plastic rivets which will pop free with pressure.