How do I install a rotor on a Ford Escape?

Answer by  p944 (21)

Loosen wheel lug nuts, place car on jack, and remove wheels. Remove the brake caliper, there are 2 retaining bolts. Slide the brake caliper assemply up. Now remove a bolt in the center of the rotor. lightly tap the rotor off the hub with a rubber hammer.

Answer by  Amber40 (24961)

Start by securely jacking up the car and removing the wheel. The unbolt the caliper and tie it up off to the side. Use some rope or wire to keep the weight of the caliper off the lines to prevent damage. Remove the spindle nut if it is a 4wd. Otherwise just slide the old rotor off.

Answer by  heather88 (1897)

Go to an auto parts store, tell them the make and model and get a manual for the car. It will tell you how to install the rotor on the car.