How do I go about repairing RV floors?

Answer by  Rick4107 (7)

Identify the damaged area and the depth of damage into the floor. Remove the damaged material and clean so that you have a straight, clean edge. Find suitable replacements for the damaged material such as wood, carpet or vinyl. Trim the material to fit. Insert the patching material and hold in place with adhesive. Trim and clean any rough edges.

Answer by  bottomgirl (6)

Pull up the old floor to assess for additional damage. Measure the space and calculate the amount of material needed.Buy supplies and start replacing what you pulled up.

Answer by  mandown (416)

Repairing RV floors isn't impossible to do but it would be best to hire a professional. But if you insist on doing it on your own, you must first : assess the damage to the floor, then remove the old floor and prepare it for the new floor, then you must rebuild the new floor. I recommend stick on tile

Answer by  Aleksandra90 (62)

For repairing RV all you need is a technique. To start you need to dry wood and then by pouring pre-diluted with thinned epoxy resin. Simply need to heat the resin to be as thin and possibly add a little alcohol or acetone.

Answer by  belle39 (966)

It depends on whether you're choosing to use click or tile flooring. If you're not good at repairing the RV floors yourself, look

Answer by  salsafoodie (3146)

There is a variety of ways to repair your RV floors. If it is a small repair then sealant will help with the cracks on the surface of the floor. If its a major damage then I would suggest to take it to a professional and they can repair it.

Answer by  Riley (765)

If floor is rotted you will have to remove all damaged wood or carpet and replace the floor joists with additional framing and added support. Once you have completed the frame you can lay plywood; if insulation is wet, replace it before plywood. Now you can cover with any covering.