How do I fix a high beam on my Porsche?

Answer by  Jsands1982 (871)

Remove the headlight and test it in the other headlight socket to see if the high beams switch works. If switching the headlight's and one side works. It is safe to say that the bulb needs only to be replace. If not, check fuse, then your wires for wear, tear, or bare. then lastly replace the high beam switch.

Answer by  Amber40 (24961)

If you have a single high beam out then you probably just need to replace the bulb. The high beam side can blow out separately from the low.

Answer by  eltron (15)

If only one side is bad, you can replace that element. If both sides (driver and passenger) are not working, look for a wiring or switch problem.

Answer by  Amber40 (24961)

If there is a problem with the bulb then you could just replace it and it should fix any bulb issues. Otherwise you might need to get a wiring diagram.

Answer by  heather11409 (75)

try to pull the light lever that has the bright and low settings towards you.if that doesnt work then try pushing it forward or side to side and thats it

Answer by  mahee (720)

If we need to fix a high beam on it then we have to remove the headlight and have to test in the other headlight socket to see thatis it works or not?If it is work then only have to fixed the high beam switch.

Answer by  loveulouis (176)

You have to replace the light with na new one. If you open the hood and and find the light and give it a half turn it should come out