How do I change the water pump on a 1995 Jeep Cherokee 4WD, 6 cylinder?

Answer by  foxstang (133)

Drain the coolant. Remove the upper and lower hoses. Remove the water pump. Clean the gasket surface, install a new gasket and install a new water pump.

Answer by  happytimes63 (865)

Drain coolant, remove shroud bolts, remove serpentine belt with tensioner. Remove fan, disconnect hoses, remove water pump bolts and pump. Clean, place new gasket pump. Reverse order reassemble. refill coolant.

Answer by  Grag (452)

Unbolt it from the engine and then clean the seal out and make sure that is clean then put some silicon on the new seal and install the new pump