How do I change an interior light on my Jetta?

Answer by  Zaka (2315)

Uncover the plastic covering with a flat-headed screwdriver. Next, remove the damages bulb with an appropriate replacement. Close the covering.

Answer by  Jeff34 (41)

Check the dome cover to see if it is a snap-on or held in by screws. Loosen if screws hold it on. If it is snap-on take a flat screw driver and there will be a little opening. Pop the cover off carefully take out light bulb and replace. Then do the reverse you did putting it on.

Answer by  JOHNEBEG (486)

Use butter knife. Remove the clear plastic cover prying gently on all sides. Remove the plastic cover surrounding the switches. Remove the plastic cover surrounding the bulbs. Remove bulbs.

Answer by  Doug77 (1433)

Use a small screwdriver or knife to pry at the edge of the lens. Once the lens is removed, pull the old bulb out and reinstall in reverse order.

Answer by  6ixk (1156)

The interior light is located directly under the bezel, use a flat head screw driver to pop it off, and pop a new one in place. Then replace the bezel, its as easy as that, if it doesn't work still, check fuses.

Answer by  N31J (148)

Changing the interior light of a car is one of the easiest thing to do in fixing a car, however it could also be very hard for novice people. The first step is to pry off the clear piece of plastic that reveals the light from the bulb. Then change the bulb!

Answer by  laura27 (1216)

Use a flat-head screw driver to take plastic covering off. Take damaged bulbs out and put new ones in then reverse back from how you did it the first time.