How can I replace small signal board on Magnavox LCD?

Answer by  mb (5482)

Are you sure its the signal board that is causing the problem? Try a universal remote, if that doesn't work you can look into replacing the signal board. Caution, unless you are a professional you could ruin your TV.

Answer by  worker335384 (14)

First find out how easy it would be to remove the signal board from the tv. Then look on the the signal board to find the company that manufactured the signal board and contact them. Ask the company if they have replacement signal board and how much it would cost.

Answer by  mcmario2007 (786)

You have to be sure it is the signal board that has the problem , the best way to find out is to try a universal remote if the tv works then it is not the signal board problem , i would suggest try this method and if it does not work then change the signal board.

Answer by  Jalaine11 (2043)

Before replacing the signal board on your Magnavox LCD television you should double check a few other things first. First, make sure that your televisions remote is working properly. Change the batteries in your remote. Also try factory resetting the tv and the remote. Those instructions should be in your users manual.

Answer by  Lakshmi65 (715)

Remove the existing board with all the wire and then place this Magnavox LCD as per instruction given in the manual. check whether the remote is working in your televisions. factory resetting of the TV and the remote has to be restores as per the instructions should be in your users manual.