How can I repair the convergence in a rear projection TV?

Answer by  Shabu (70)

Sub Deflection Board is the main part of these type problems. Find the model number of your TV on the back of the TV for the serial and model No for getting suitable part. Then simply remove it and install new one. After that Adjust all settings.

Answer by  rhickok1109 (233)

This varies with the make of TV. On most, it can be done through the convergence option on theremote control menu, under "Picture Settings," "Function" or "Advanced Options. "

Answer by  Jalaine11 (2043)

There are many websites that can walk you through the step by step process of repairing the convergence on your rear projection TV. Be ready by knowing the model and serial number of you television. These should be located on the back of your TV.

Answer by  Lakshmi65 (715)

When the convergence gets repair you will see ghosting around image,note down the model no and serial no of your tv. We will need to repair the sub deflection board in the tv. So remove the board and send it to the service center. So that they will rectify or replace a new board. After that fix it with screws.