How can I change the front headlight in my Impala?

Answer by  TravisUSMC (979)

Open the engine hood. Remove the wiring plug from the back of the light. Unscrew the hold-down by turning counterclockwise. Remove bad headlight. Replace with the new one and then simply reverse the steps to seat, fasten, and plug in the new one.

Answer by  worker3294 (236)

Remove the connector for the headlight bulb by squeezing the clip and removing it. Pull the bulb out by rotating it, then replace.

Answer by  eyeguy (3760)

four screws are located at corners of lamp. loosen all four screws then unplug the bulb with a screwdriver the entire lamp should become free

Answer by  JodiJ (312)

Depending on the year of your Impala. On older models you need to get to the two mounting screws that hold in the light bulb. On newer models just get access to the rear of the light assembly and twist out the bulb. Reverse steps in either case to finish.