Can you help me with a Jeep clutch repair?

Answer by  TravisUSMC (979)

You can not repair this clutch, only replace it with a new one. You will need to safely drop the transmission. The clutch will be very visible then attatched to the flywheel. Undo all the bolts holding it in place. Using the blue clutch tool to line up the new one first, install it, then tighten all bolts. Replace transmission.

Answer by  mechtech74 (692)

Start by removing the driveline and transmission. Replace the disk, pressure plate, and throwout bearing. In addition to the usual rachet and sockets you will need a shaft alignment tool.

Answer by  oui72 (514)

If the clutch just slips that means no pressure the rubber caps inside the clutch cylinder may need change. There are two clutch cylinders, one is located right in the engine bay directly connected to the clutch pedal. The other one is under the body at the transmission unit. Or you can just change the whole cylinder.

Answer by  GreenIz (15)

You need two people to do a Jeep clutch repair. One person needs to push on the clutch pedal while the other person bleeds the air from the clutch cylinder.