Can you help me troubleshoot my video aux.?

Answer by  vashna (148)

If by video aux. you mean an auxiliary video connector, you might start by making sure that the connection is clean and free of dust. Sometimes, dust can prevent good electrical contact. Try carefully jiggling the RCA connector around to make sure that it's properly in place. Make sure it's not near any other equipment that might cause electrical interference.

Answer by  anime018 (234)

ok, have you put the tv or device in the aux mode. You can try putting the tv in 00 or looking for the aux button. You can always try and check to see if all the wire are plugged in and placed in the right order. color matching color.

Answer by  zenithzenish (98)

If you have a problem with video aux at first you try to unplug and then replug the video aux cable. This will be an easy troubleshooting step.

Answer by  x2rider (52)

Select the TV/Aux button until you see the word AUX on the screen. Connect the cable with the yellow connector from your video camera to the yellow connector of the AUX on your TV. Turn on your video camera. If the picture does not show up, try another cable. If still no picture, try another camera or dvd player.

Answer by  mahee (720)

Video aux is a very useful electronics item.If there is troubleshoot, at first we must check the cable that is it in wrong direction or right directio? We have make sure that the connection must be clean and free from dust.We should also check the plug that is it plugged or unplugged?If battery is old,it must be changed.